Multi-zone

The perfect solution for multiple rooms

Balance the temperature of all your rooms with a single outdoor unit.

Economic

Multi-Zone

Multiple rooms require multiple indoor units for cooling and heating.

The Kanartic ZERO multi-split unit provides the same cooling and heating effect as several single-split units, while consuming significantly less energy.

So you save money faster!

Performance

EFFICIENCY

  • Air outlet temperature reaches 35°C in 60 seconds
  • Maximum air outlet temperature 50℃ with high compressor frequency up to 120 Hz
  • 100% full efficiency to keep you warm at -25°C (100% defrosting rate at -15°C)
  • Continues to work even at ambient temperatures as low as -30°C

Security

Operation Continues

When one or more indoor units are faulty or undergoing maintenance, the other indoor units in the system can still operate at the same time to avoid losing all heating or cooling function.

Innovation

Ease of installation

The Kanartic ZERO multi-split system helps installers easily complete wiring and piping. It saves considerable effort by automatically correcting connections and eliminates the need to test each indoor unit after installation. Installers simply press the "check switch," wait a few minutes, and the unit can operate as intended.

Innovation

Smart Inverter

Thanks to its innovative 120Hz inverter technology, the Kanartic ZERO multi-function system can adjust the output capacity according to temperature changes, controlling the operation of the compressor and fan motors.
When not all rooms require heating/cooling or when the ambient temperature changes, it operates at partial load and consumes less energy.

Kanartic High Efficiency Heat pump

Efficiency

Can take 142% of the charge

Due to their efficiency in handling demands, it is possible to load each compressor to 142% of its nominal capacity without affecting performance.

Since the indoor modules do not all operate at full capacity at the same time, it is possible to install more of them!

Example: 1 x 27kBTU compressor can support 4 x 9kBTU indoor units

TU1 COPPER

Solidity

Copper TU1 vs TP2

The systematic use of TU1 copper offers you purity and resistance to formic acid perforation.

In addition, it increases heat conductivity by 15%.

Precision

100 speeds at your fingertips

Fan speed at 100 speeds
With the compressor functioning correctly, the GA inverter
offers 100 continuous air volume options
that the end user can adjust, so that there is no longer any unwanted airflow in the room

Humidity sensor

Intelligent management

By activating humidity mode, the system can reach the desired humidity level while maintaining a stable ambient temperature, thanks to the humidity sensor.

Kanartic Multi Function Board

Multifunctional

Multifunctional card to push the limits (OPTION)

The multifunction card allows you to open your system to the world around it.

  • A dry contact to trigger an alarm, for example.
  • A 24V interface for connecting a thermostat of another brand.
  • A BACNET interface
  • Leak detector
  • ...

Question ?